MZ-450 50 mm Permeable Grass Paver for Car Parks

MZ-450 is a 50 mm HDPE grass paver designed for car parks, access roads, emergency lanes and vehicle hardstandings built over an engineered permeable pavement base. The cellular modules confine soil and aggregate while leaving open areas for grass growth and surface-water infiltration.

This page focuses on parking and vehicle-use applications. The published strength value applies to the product data, while actual pavement performance depends on subgrade condition, base thickness, drainage, edge restraint, fill and traffic design.

Technical Data

PropertyMZ-450
Size465 × 535 × 50 mm
MaterialHDPE (high-density polyethylene)
Typical areasAccess roads, emergency access lanes, car parks and vehicle hardstandings
Listed compressive strength1,764 kN/m² (180 t/m²)
Weight4.55 kg/m²
Listed durabilityAt least 8 years in neutral ground, pH 4–9
Working temperature−40 °C to 90 °C
HCl resistanceGB 4218-1984; 30% × 24 h; no visible change
NaOH resistanceGB 4218-1984; 40% × 24 h; no visible change
Thermal ageingGB/T 7141-1999; 70 °C × 24 h; no visible change
UV test entryGB/T 18830; UPF > 30; T(UVA)AV < 5%; qualified
Package8 pcs = 2 m² = 1 bundle
Indicative container quantity20 ft: 700 m²; 40 ft: 1,420 m²; 40 HC: 1,628 m²

MZ-450 50 mm HDPE grass paver

Parking and Access Applications

  • Permeable grass car parks
  • Secondary access roads
  • Emergency and fire-access lanes
  • Vehicle hardstandings and overflow parking
  • Landscape areas that require occasional vehicle access

Traffic frequency, turning loads and emergency-vehicle requirements should be reviewed by the project engineer. Grass establishment also depends on suitable soil, irrigation, sunlight and maintenance.

Typical Installation Sequence

  1. Excavate and compact the formation to the designed level.
  2. Install separation geotextile and the specified load-bearing sub-base.
  3. Prepare a level bedding layer and strong edge restraints.
  4. Connect the MZ-450 units, staggering joints where appropriate.
  5. Fill cells with the specified growing medium and seed or turf.
  6. Keep traffic off the area until the pavement and vegetation are ready.

Typical sub-base layers for MZ-450 grass pavers

MZ-450 grass paver installation procedure

Project Images

MZ-450 grass paver parking project

Permeable grass car park using modular pavers

Completed grass-grid vehicle area

Project Enquiry

For selection and pricing, send the total area, vehicle type and frequency, subgrade condition, proposed pavement build-up, grass or gravel finish, destination and quantity. Leiyuan can then review MZ-450 supply requirements.

Get in Touch

We'd love to hear from you. Please fill out the form below.

Please enable JavaScript in your browser to complete this form.