LY950 HDPE Soil Stabilization Grid for Horse Areas

The LY950 HDPE soil stabilization grid forms a structural separation layer between equestrian footing and the prepared subgrade. It is intended for paddocks, open stables, riding areas and access routes where loose surface material can mix with the soil, create ruts or become difficult to maintain in wet conditions.

Ground Reinforcement and Layer Separation

Once installed over a properly designed base and filled with suitable aggregate, the interlocking grid distributes loads across a wider area and helps keep the tread layer above the substructure. Its open cells allow water to pass through the finished surface, supporting a firmer, more consistent footing system. The correct base thickness, geotextile and fill should be selected according to local soil, drainage and loading conditions.

LY950 HDPE soil stabilization grid module

soil stabilization grid beneath horse-area footing

LY950 Specifications

PropertySpecification
Typical usesPaddocks, open stables, riding arenas, horse walkers, lunging areas, feeding points, round pens, tracks, gravel roads and washing areas
Material100% recycled HDPE
Size336 × 336 × 50 mm
Cell wall thickness2 mm
Weight0.65 kg/pc; 5.85 kg/m²
Open-cell area92% at top; 75% at base
Filled load-bearing capacityMore than 250 tonnes/m²
ColorBlack or dark green
Chemical and weather testingHCl/NaOH per GB 4218-1984; thermal aging per GB/T 7141-1999; UV resistance per GB/T 18830
Durability referenceAt least 10 years in neutral ground with pH 4–9
PackingNine sections pre-assembled into an installation unit covering approximately 1 m²
Container loadingApprox. 570 m²/20GP; 1,150 m²/40GP; 1,310 m²/40HQ

filled HDPE ground stabilization grids

System Advantages

  • Separates the riding or paddock surface from the subgrade.
  • Distributes loads and helps reduce surface deformation and rutting.
  • Open structure supports drainage and reduces standing-water risk.
  • Interlocking geometry maintains alignment across larger areas.
  • Resistant to frost, UV exposure and ammonia; recycled HDPE does not rot.
  • Can be cut for boundaries and curves, with edging accessories available.

HDPE soil stabilization grid and edging components

interlocking connection on LY950 stabilization grid

Installed Horse-Area Grid

installed grid mats for stabilized equestrian ground

For B2B supply or a project quotation, send the area, subgrade conditions, expected loads, surface fill and installation location. Greening Solution can provide packing information, samples and OEM support. Interested distributors can review the paddock grid cooperation program.

distributor cooperation for paddock stabilization grids

Get in Touch

We'd love to hear from you. Please fill out the form below.

Please enable JavaScript in your browser to complete this form.